uPAC-7186EX-FD: Data Acquisition Controller with 64 MB NAND Memory with 80 Mhz CPU

uPAC-7186EX-FD

E-mail this Product

Product Reference & Support :

web/modbus demo programs

Data Acquisition Controller with 64 MB NAND Memory with 80 Mhz CPU

Product Pricing:

uPAC-7186EX-FD: $419.00

Please Call 1-888-971-9888 for Volume and OEM discount pricing!

Features

uPAC-7186EX-FD is a Data Acquisition controller. It has 64 MB of NAND Memory. Data Acquisition and Control is done all in one device.

It's powered by a 80186-80 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. It has one serial RS-232 port and one RS-485 port. Ethernet support is provided by a NE-2000 compatible controller with 16K bytes of on-chip buffer memory and 10Base-T media interface. The I-7186EX also provides 14 user defined I/O lines. A cost-effective I/O expansion board with A/D, D/A, relay drivers and protected inputs is available. The I-7186EX also supports battery back-up SRAM disk board and Flash-ROM board, providing non-volatile mass storage from 2 megabytes to 64 megabytes. The 10BASE-T port is equipped with a RJ-45 connector. The 10BASE-T interface supports distances up to 100-meters (cable length) between I-7186EX and the network hub.

Ethernet protocol is the de-facto standard for local area networks. Via Internet, connectivity is occurring everywhere; from home appliances to vending machines to testing equipment to UPS. Many embedded designers face dilemma of adding Ethernet interfaces to their products, either for use with local networks or for connecting to the Internet. Solutions to this problem include hardware and software. Connecting via Ethernet requires TCP/IP software protocol. The installed base of Ethernet networks is huge and growing. Most office building, factories, and new homes have installed Ethernet networks. With Ethernet, the network is always available. Using Ethernet for networks in industrial areas is appealing because the cabling is already installed.

AMD 80186-80 Embedded CPU or compatible
Supports a variety of TCP/IP features
- including TCP, UDP, IP, ICMP,ARP
10BASE-T NE2000 compatible Ethernet Controller
Reloadable Operating Software
Remote Configuration
Diagnostics
64-bit hardware unique serial number inside
COM driver support interrupt & 1K QUEUE Input & Output buffer
COM ports: COM1, COM2,
Built-in RTC, NVRAM, EEPROM
14 User defined I/O lines
Built-in I/O expansion bus interface
- Can add on one expansion board
Built-in self-tuner ASIC controller on RS-485 port
7-segment LED display for I-7188EXD
Built-in MiniOS7
Program download port:
- COM1 (Ethernet Port Available soon)

TCP/IP library
The software library supports TCP/IP protocols & web server. Support the following protocols.

TCP, Transmission Control Protocol:
- Transport layer with connections, flow control and error correction
UDP, User Datagram Protocol:
- Simple connectionless transport layer
IP, Internet Protocol:
- The network layer
ICMP, Internet Control Message Protocol:
- Part of IP for practical purposes
ARP, Address Resolution Protocol:
- Retrieves a host's network controller's hardware address, given the host's Internet address
Reverse Address Resolution Protocol:
- Retrieves a host's Internet address, given the host's network controller's

Specifications & Additional Information

CPU	80186 CPU (80MHz)
SRAM	512K Bytes
Flash	512K Bytes Erase Unit is One Sector (64K bytes) 100,000 Erase / Write Cycles.
NAND Flash	64 MB x 8 Bit
EEPROM	16K bytes Data retention > 100 years 1,000,000 Erase / Write Cycles
NVRAM	31 Bytes (Battery Backup, Data Valid up to 10 years)
RTC (real time clock)	Year-2000 compliance; seconds, minutes, hours, date of the month; month, year, valid up from 1980 to 2079
Hardware Serial Number	64-bit
Watchdog Timer	Built in
Communication Interface	Ethernet Port 10/100 Mbps Auto-negotiating; Auto-MDIX; LED indicator COM1 RS-232 (TXD, RXD, CTS, RTS and GND); Program download port. COM2 RS-485 (D2+, D2-, self-tuner ASIC inside) COM3 RS-232 (TXD, RXD and GND) X305B
Baud rate	115.2K bps Max For COM1, COM2, COM3
Digital Output	X305B
Output Channel	1
Output Type	Open-Collector (NPN)
Load Voltage	30 VDC, Max
Load Current	100 mA, Max
Isolation Voltage	Non-Isolation
Digital Input	X305B
Input Channel	1
Input Type	Sink, non-isolated channel with common ground
Off Voltage Level	+1V max.
On Voltage Level	+3.5V ~ +30V
Isolation Voltage	Non-isolation
Analog Input	X305B
Input Channels	7
Resolution	12-Bit
Input Range/Type	0 ~ 20 mA / Single-Ended
Isolation Voltage	Non-isolation
Dimensions	123 mm x 72 mm x 33 mm
Power requirements	+10 to 30VDC, Non-Isolation
Operating Temperature	-25°C ~ +75°C
Storage Temperature	-30°C ~ +80°C
Relative Humidity	10% to 90% non-condensing

	Wireless Home

	Industrial GSM & RF Modems

	Industrial Wireless Zigbee

	Wireless Controllers

	Industrial Wireless Ethernet

	Industrial Antennas

	Industrial GPS Receivers

NS-208 8-Port Industrial 10/100 Mbps Unmanaged Ethernet Switch, DIN-Rail mount. Compatible with Sixnet, Stride, Hirschmann, and other industrial Ethernet Switches. More Info	NS-205 Unmanaged 5-Port Industrial Ethernet Switch with Din Rail Mount - Operating Temperature -40 ~ +75 �C More Info	DIN-KA52F 24V/1A Power Supply (Din-Rail Mount) More Info	DP-640 24V/1.7A Power Supply More Info
GTM-201-RS232 Industrial Quad-band GPRS/GSM Modem with RS-232 Interface More Info	GTM-201-USB Industrial Quad-band GPRS/GSM Modem with USB Interface More Info

ICP DAS Wireless